Door area

Here is the wall clad in 3mm ply with a gentle curve to the doorway. At the bottom of the wall you can see the 2 holes for the heater which will have the covers matching the one under the bed. On the right you can see the flow and return pipes to the diesel heater, the longer loop is for the towel warmer in the bathroom. The hole is for the access to the toilet waste tank.

Plastic coating the bathroom floor

I used PlastiDip paint which when cured turns into plastic. To get the paint to apply properly we had to store the tin in the freezer. 3 Coats were used to make it waterproof. You can see the two wastes in the floor around the toilet base. This shot also shows the white waterproofed walls.

Painting bathroom walls

You can see the base coat on the walls and floors ready for the exterior waterproof paint.

Shower room floor and walls

Preperation of the floor and walls of the bathroom in readiness for the flooring to be painted on. The corners are sealed with Sika - flex and the wastes are fitted in the floor. The wooden box is a raised shelf for the toilet.

Generator mounting

These two pictures show the generator mounted in it's final position. The mountings are anti-vibration mounts I fabricated.

Lighting test

A test of the halogen lighting in the dark.

Second heater matrix

This shows the dividing wall between the main area and the under the bed section. It houses the fans and the heater matrix, the front is finished off with black ABS covers from Ebay. The heater is not central in the walkway, this is so the cupboard door to the left can open and nt obstruct the heaters.